QNAP NVR-1012

QNAP NVR-1012 Model
Brand	QNAP
Model	NVR-1012
QNAP NVR-1012 Spec
Type	Management System with Camera
Specifications	NVR-101: HDD Support: 1 x 3.5" SATA I / SATA II HDD, up to 1TB or above, expandable to 2TB via eSATA (the HDD is not included) LAN Port: 1 x Gigabit RJ-45 Ethernet port LED Indicators: Power, USB, status, LAN, hard disk USB: 3 x USB; for USB storage device (one touch auto-video backup) and UPS device Buttons: USB auto-video backup button, power button, reset button Form Factor: Portable desktop Temperature 0~35°C Humidity 0%~85% R.H. Power Supply External power adaptor, 36W, 100~240V Energy Saving Design Low power consumption & low noise design Secure Design K-Lock security slot for theft prevention ICS-1013: Image Sensor: 1/4" Color CMOS sensor, maximum resolution 640x480 pixels CPU & Memory: ARM9 processor with 8MB flash and 32MB RAM Network: 10/100 Mbps Fast Ethernet with Auto MDIX Wireless: Wireless IEEE 802.11b/g Wireless Security: 64/128 bit WEP and WPA-PSK Built-in Microphone: Sensitivity of built-in microphone -48dB +/- 3dB, freq 50~16000MHz Audio out: Mono output to external speaker Day Vision: Minimum illumination 0.5 lux Night Vision IR LED with light sensor control night vision 0 lux within 5 meters with built-in 6 infrared LEDs on Image Setting: Brightness/ sharpness/ saturation Upside Down and Mirror Digital Zoom: 3x Compression Ratio Setting: 5 levels Lens Type: Board lens Aperture (F/No.): 2.8 Focus Length: 4.5mm View Angle(Diagonal): 54 degrees LED Control: Normal / Off Power LED: Orange Link/ act. LED: Green Reset Button: Press over 5 sec to reset to factory default USB Dismount Button: Press over 4 sec to dismount USB device
QNAP NVR-1012 Features
Features	Live real-time monitoring Instant alarm, in case any accident should happen Various alarm type to capture Powerful system functions and data protection Most complete recording functions Trouble-free setup and effortless maintenance Environment-friendly and energy-saving design